Polymer grades by application

Standard PP homopolymer for general injection molded parts. Balanced stiffness and flow. MFI 8–25 typical for closures and thin-wall containers.

High-flow PP homopolymer for thin-wall food containers. Excellent flow, fast cycle times. Often nucleated for clarity.

Heterophasic PP with rubber phase for impact strength at low temperatures. Standard for automotive trim and industrial containers.

Ethylene-co-PP with nucleating agent for high clarity. Drop-in replacement for some PET applications where heat resistance matters.

Narrow MWD PP for fiber and meltblown nonwovens. Hygiene products, geotextiles, FFP masks.

Isotactic PP optimised for biaxially-oriented film line. Excellent clarity and stiffness for snack laminates and pressure-sensitive labels.

High-molecular-weight HDPE for bottles up to 10 L. Excellent ESCR and stiffness for HDPE detergent and dairy containers.

PE100 bimodal HDPE for pressure pipe to ISO 4427 / EN 12201. MRS 10 MPa at 20 °C / 50 years. Black or RC variants for trenchless.

Standard HDPE for crates, closures, and rigid containers. Good stiffness, ESCR and processability.

Hexene-comonomer HDPE for high-stalk blown film. Excellent dart impact and tear for thin gauge bags and sacks.

General-purpose LDPE for shrink and lamination film. Good optical and processing window.

Soft-flex LDPE for injection molded lids and squeeze-fit closures.

Butene-1 comonomer LLDPE. Cost-efficient blown film with good seal initiation. Heavy-duty sacks and liners.

Hexene-1 comonomer LLDPE. Higher dart and tear than C4. Lamination, food packaging and collation shrink.

Octene-1 metallocene LLDPE for cast stretch film. High puncture and cling, best in class for pallet wrap.

Yellow PE80 MDPE for gas distribution to EN 1555. MRS 8 MPa.

K-67 / K-68 suspension PVC for rigid pipe and fittings. Compounded with stabilisers (Ca-Zn or organotin in EU).

Emulsion-polymerised PVC for plastisol formulations. Spread-coated tarpaulin, dipped gloves, automotive underbody.

Pre-compounded flexible PVC for low-voltage cables. Phthalate-free formulations standard in EU since REACH restriction.

IV 0.78–0.82 dL/g bottle-grade PET for water and CSD. PPWR mandates ≥25% rPET in beverage bottles by 2025, 30% by 2030.

Lower-IV PET (0.62–0.66) for textile fiber. Bottle-flake-derived rPET widely used since 2020 for sustainability claims.

APET sheet for clear thermoformed trays. CPET (crystalline) variant for ovenable containers up to 220 °C.

Crystal-clear GPPS for injection molded parts. Brittle, alloy with HIPS or use SBC for impact applications.

High-impact polystyrene sheet for thermoforming. Refrigerator inner liners, yogurt cups, vending cups.

Standard ABS for general purpose injection molding. UL94 V-0 flame-retarded variants for IT and white goods.

Higher-MW ABS for sheet extrusion. Co-extruded with PMMA cap layer for weather resistance.

PCR HDPE from post-consumer bottle stream. Typical 30–100% inclusion in non-food packaging. Food-contact rPE limited to specific approved processes.

Post-consumer or post-industrial LDPE for non-food film. Typical inclusion 30–80% with virgin LLDPE.

Mechanically recycled PP from rigid packaging streams. Suitable for non-aesthetic parts and dark colours.

Food-grade rPET pellets from approved decontamination processes (EFSA-listed). Mandated minimum content under PPWR.